WTC Judy Wood Court Case
US District Court Unseals Second 9/11 ‘Inside Job’ Case
Developments regarding Dr Judy Wood, a former Professor of Mechanical Engineering from Clemson University, and Dr Morgan Reynolds, the former Chief Economist of the US Department of Labor. Both Wood and Reynolds are represented by mainstream attorney Jerry Leaphart.
Those following developments in 9/11 “inside job” legal proceedings are aware that the US District Court in Southern New York unsealed a complaint filed by Dr Morgan Reynolds against private contractors hired by the government. This lawsuit alleges that the contractors supplied bogus analyses for the NIST Report of an aluminum airplane with a plastic nosecone gliding through a steel and concrete building . Information pertaining to this lawsuit, including a PDF of the unsealed complaint, can be found on Reynolds website:
More recently however, September 12, 2007 to be exact, the Southern New York District Court unsealed a second “inside job” case. This second complaint was filed by Dr Judy Wood against the same private contractors, alleging the World Trade Center was destroyed by Directed Energy Weapons (DEW), and not airplane strikes, jet fuel fires, or gravity. Wood’s unsealed complaint is available here (in the Qui Tam section): http://drjudywood.com/articles/NIST/Qui_Tam_Wood.html
Dr James Fetzer, the founder of Scholars for 9/11 Truth, interviewed Dr Wood and Mr Leaphart on his October 11th Dynamic Duo radio show to discuss the new unsealed complaint. An MP3 of this broadcast is downloadable at this link: http://tinyurl.com/3dmpqo
Dr Fetzer also submitted a press release for this wonderful news. Read it and learn that NIST admitted to Dr Wood (in writing) that they did not analyze the “collapse” of the towers!
One of the Defendants, Applied Research Associates (ARA), is a manufacturer of directed energy weapons :
ARA is also a Silver Level Founding Sponsor of the Directed Energy Professional Society (DEPS). Founded in 1999, DEPS put out their first newsletter one year before 9/11, containing the following excerpt:
"Lasers in space, lasers in the stratosphere, lasers
on and over the battlefield - we're at the
beginning of an evolutionary new wave of
Dr Wood has also discovered that the "Capabilities - National Defense and Aerospace" section of ARA's website contains an image depicting a simulation with the following characteristics:
1. A building (in the foreground) having damage similar to that of WTC 6 and the Murrah Building in OK City.
2. A building (behind the red building) with the same cosmetic design as WTC 3.
3. A building (in the background) turning to dust similar to the Twin Towers.
Here's the image:
See pages 3 and 4 of Dr Wood’s Appeal to NIST for information regarding that photo:
Here are pages 3 and 4:
Those skeptical of the directed energy weapon theory often ask how such a weapon could eject steel beams horizontally from the towers, as seem in some of the videos and photographs. Dr Wood says the DEW didn’t destroy the towers itself, but instead activated chemical clouds that were released from within the buildings; much like how light activates photographic film. Dr Wood has discovered photographic evidence of these chemical clouds coming from the towers, as well as WTC 7:
The Evidence for Directed Energy Weapons is Very Strong!
**Let's take this Vertical Cut on WTC 4 as an example.
The building material on the other side of the cut is "missing".
Where'd it go?
**Has anyone noticed... the WTC 4 cut is in the same path as the South Tower's north wall?
The South Tower is also "missing".
**How about these Cylindrical Holes in WTC 5 and WTC 6?
What, if not a beam weapon, could make these?
**How about this video of the Steel Core Turning to Dust and trickling down?
**What type of weapon could destroy car engine blocks, yet leave unexploded gas tanks?
**This police car looks too weird.
**These cleanup workers certainly look puzzled.
What happened here?
**About 20 minutes before the South Tower is destroyed, the FAA orders all aircraft to land.
Two minutes after the North Tower is destroyed, the FAA allows military craft back up.
One must wonder... where did the towers go?
Look at these two comparisons. What happened?
Drs Wood and Reynolds have filed legal challenges, which provides an excellent opportunity for a new investigation.
They deserve our full support.
It’s every American’s duty to remove corrupt elements in the government.
Please help by distributing the above information to your local media.
Ace Baker wrote:
understand what Dr. Wood is saying. She envisions that the directed energy beam activates a reaction in another substance. It is a method of precision control. The reaction could be chemical, or might very well be nuclear. We know for sure that beam activated fission reactions exist, they are patented. You are correct (in my view) that many aspects of the events are consistent with cold fusion.
Please consider the possibility that some hydrogen or helium isotope (substance x) can be distributed in the building, and induced into a powerful but controlled reaction via directed energy beams. This solves the energy requirement problem, and dismisses Greg Jenkins.
U.S. Navy Report Supports Cold Fusion
A new official report prepared by the U.S. Navy strongly supports cold fusion research and its funding:
TECHNICAL REPORT 1862, February 2002
Thermal and Nuclear Aspects of the Pd/D2O System
It is a public document with unlimited distribution. Because of its importance, we are posting below some of the introductory material in each of the report's two volumes. The full report is available on the internet in two electronic formats:
We wish to highlight a crucial statement from the Foreword to the report:
"As I write this Foreword, California is experiencing rolling blackouts due to power shortages. Conventional engineering, planned ahead, could have prevented these blackouts, but it has been politically expedient to ignore the inevitable. We do not know if Cold Fusion will be the answer to future energy needs, but we do know the existence of Cold Fusion phenomenon through repeated observations by scientists throughout the world. It is time that this phenomenon be investigated so that we can reap whatever benefits accrue from additional scientific understanding. It is time for government funding organizations to invest in this research.
Dr. Frank E. Gordon, Head
Navigation and Applied Sciences Department
Space and Naval Warfare Systems Center, San Diego"
Again, because of its national and international significance, we present here the initial material of Volume 1 in its entirety:
TECHNICAL REPORT 1862 February 2002
Thermal and Nuclear Aspects of the Pd/D2O System
Volume 1: A Decade of Research at Navy Laboratories
S. Szpak, P. A. Mosier-Boss, Editors
Approved for public release; distribution is unlimited SPAWAR Systems Center San Diego, SSC San Diego San Diego, CA 92152-5001
P.A. Miller, CAPT, USN Commanding Officer R.C. Kolb, Executive Director
The work described in this report was performed for the Office of Naval Research through the collaboration of Space and Naval Warfare Systems Center, San Diego (SSC San Diego); the Naval Air Warfare Center, Weapons Division, China Lake; and the Naval Research Laboratory (NRL). Released by G.W. Anderson, Head, Applied Research and Technology Branch, Under authority of R.H. Moore, Head, Environmental Sciences Division.
Contributing authors (in alphabetical order): Dr. Pamela A. Mosier-Boss (Spawar Systems Center San Diego), Dr. Scott R. Chubb (Naval Research Laboratory, Washington, DC), Professor Martin Fleischmann, F.R.S.,United Kingdom, Dr. M. Ashraf Imam, Naval Research Laboratory,Washington, DC, Dr. Melvin H. Miles, Department of Chemistry, Middle Tennessee State University, Murfreeboro, TN, Dr. Stanislaw Szpak, San Diego, CA.
Twelve years have passed since the announcement on 23 March 1989 by Professors Fleischmann and Pons that the generation of excess enthalpy occurs in electrochemical cells when palladium electrodes, immersed in D2O + LiOH electrolyte, are negatively polarized. The announcement, which came to be known as "Cold Fusion," caused frenzied excitement. In both the scientific and news communities, fax machines were used to pass along fragments of rumor and "facts." (Yes, this was before wide spread use of the internet. One can only imagine what would happen now.) Companies and individuals rushed to file patents on yet to be proven ideas in hopes of winning the grand prize. Unfortunately, the phenomenon described by Fleischmann and Pons was far from being understood and even factors necessary for repeatability of the experiments were unknown. Over the next few months, the scientific community became divided into the "believers" and the "skeptics." The "believers" reported the results of their work with enthusiasm that at times overstated the significance of their results. On the other hand, many "skeptics" rejected the anomalous behavior of the polarized Pd/D system as a matter of conviction, i.e. without analyzing the presented material and always asking "where are the neutrons?" Funding or research quickly dried up as anything related to "Cold Fusion" was portrayed as a hoax and not worthy of funding. The term "Cold Fusion" took on a new definition much as the Ford Edsel had done years earlier.
By the Second International Conference on Cold Fusion, held at Villa Olmo, Como, Italy, in June/July 1991, the altitude toward Cold Fusion was beginning to take on a more scientific basis. The number of flash-in-the-pan "believers" had diminished, and the "skeptics" were beginning to be faced with having to explain the anomalous phenomenon, which by this time had been observed by many credible scientists throughout the world. Shortly after this conference, the Office of Naval Research (ONR) proposed a collaborative effort involving the Naval Command, Control and Ocean Surveillance Center, RDT&E Division, which subsequently has become the Space and Naval Warfare Systems Center, San Diego (SSC San Diego); the Naval Air Warfare Center, Weapons Division, China Lake; and the Naval Research Laboratory (NRL). The effort's basic premise was to investigate the anomalous effects associated with the prolonged charging of the Pd/D system and "to contribute in collegial fashion to a coordinated tri-laboratory experiment."
Each laboratory took a different area of research. At San Diego, our goal was to understand the conditions that initiate the excess heat generation (the Fleischmann-Pons effect) and the search for evidence that indicates their nuclear origin. To eliminate the long incubation times (often weeks), Drs. Stan Szpak and Pam Boss decided to prepare the palladium electrodes by the co-deposition technique. Initially, they concentrated on tritium production and the monitoring of emanating radiation. More recently, they extended their effort to monitoring surface temperature via IR imaging technique and showed the existence of discrete heat sources randomly distributed in time and space. This discovery may prove to be a significant contribution to the understanding of the phenomenon.
At China Lake, Dr. Miles and his collaborators showed that a correlation exists between the rate of the excess enthalpy generation and the quantity of helium in the gas stream. Such a correlation is the direct evidence of the nuclear origin of the Fleischmann-Pons effect.
The research at NRL was directed toward the metallurgy of palladium and its alloys and the theoretical aspects of the Fleischmann-Pons effect. In particular, Dr. Imam prepared Pd/B alloys that Dr. Miles used in calorimetric experiments. It was shown that these alloys yielded reproducible excess enthalpy generation with minimal incubation times (approximately 1 day). The theoretical work of Dr. Chubb contributed much to our understanding of the Fleischmann-Pons effect.
Although funding for Cold Fusion ended several years ago, progress in understanding the phenomenon continues at a much slower pace, mostly through the unpaid efforts of dedicated inquisitive scientists. In preparation of this report the authors spent countless hours outside of their normal duties to jointly review their past and current contributions, including the "hidden" agenda that Professor Fleischmann pursued for several years in the 1980s when he was partially funded by ONR. Special thanks are extended to all scientists who have worked under these conditions, including those who contributed to this report and especially to Professor Fleischmann.
As I write this Foreword, California is experiencing rolling blackouts due to power shortages. Conventional engineering, planned ahead, could have prevented these blackouts, but it has been politically expedient to ignore the inevitable. We do not know if Cold Fusion will be the answer to future energy needs, but we do know the existence of Cold Fusion phenomenon through repeated observations by scientists throughout the world. It is time that this phenomenon be investigated so that we can reap whatever benefits accrue from additional scientific understanding. It is time for government funding organizations to invest in this research.
Dr. Frank E. Gordon, Head Navigation and Applied Sciences Department
Space and Naval Warfare Systems Center, San Diego
Table of Contents (Volume 1)
1. The Emergence of Cold Fusion- S. Szpak and P. A. Mosier-Boss
2. Events in a Polarized Pd+D Electrode Prepared by Co-deposition Technique - S. Szpak and P. A. Mosier-Boss
3. Excess Heat and Helium Production in Palladium and Palladium Alloys - Melvin H. Miles
4. Analysis of Experiment MC-21: A Case Study
Part I: Development of Diagnostic Criteria
Part II: Application of Diagnostic Criteria - S. Szpak, P.A. Mosier-Boss, M.H. Miles, M.A. Imam and M. Fleischmann
5. An Overview of Cold Fusion Theory - Scott Chubb
Appendix: Listing of Publications/Presentations Related to Cold Fusion by Navy Laboratories
Thermal and Nuclear Aspects of the Pd/D2O System
Volume 2: Simulation of the Electrochemical Cell (ICARUS) Calorimetry
The calorimetry of any electrochemical cell involves two type of activities: data collection and data evaluation. The required data are the cell potential-time and cell temperature-time series. The evaluation is based on conservation laws subject to constraints dictated by cell design and the adapted experimental procedure.
Volume 2 of this report deals with the modeling and simulation of the Dewar-type calorimeter. It was written by Professor Fleischmann to provide an authoritative discussion of the calorimetry of electrochemical cells. The emphasis is on the interpretation of data and the accuracy of the determination of the excess enthalpy generation via the appropriate selection of heat transfer coefficients. The discussion of the calorimetry of the Dewar-type cells is presented in the form of technical report for a number of reasons, among them: (i) its length would likely prohibit publication in topical journals, (ii) to clarify misunderstandings regarding the principles of calorimetry as applied to electrochemical cell in general and to the cell employed by Fleischmann and his collaborators, in particular.
- S. Szpak and P.A. Mosier-Boss, eds.
Table of Contents (Volume 2) Introduction - Symbols Used
1. The Evolution of the Icarus Data Evaluation Strategies.
2. Definition of the Heat Transfer Coefficients.
3.Differential Equations Governing the Behavior of the Calorimeters: Simulations of the Temperature-Time Series.
4. Specification of the Icarus-1 Experimental Protocols and Data Evaluation Procedures.
5. Evaluation of the "Raw Data" Generated Using the Simulation Described in Section 4.
6. Evaluation of a Measurement Cycle for a "Blank Experiment" Using an Icarus-2 System.
7. Assessment of the Specification of the Icarus-1 Experimental Protocols and Data Evaluation Procedures.
SPECIFICALLY STATES that bending a beam like this without cracking would be impossible.
Specifically states it "takes thousands of degrees to bend steel like this."
Specifically states this happened during the "collapse."
Here is a patent on beam activated nuclear reactions:
|A system is provided for generating high-energy particles and for inducing nuclear reactions. The system includes a laser and for emitting a laser beam, an irradiation target for receiving the laser beam and producing high-energy particles, and a secondary target for receiving the high-energy particles, thereby inducing a nuclear reaction.|
If the spire collapsed, then where is it? I don't see it in the rubble.
Ground Zero may have been hot for human comfort, but it was not hot enough to melt steel. If the workers' boots melted, why weren't their feet cooked? You agree that Steven Jones is a plant. He did fabricate evidence, didn't he?
WTC Molten Metal: Fact or Fiction?
Analysis of the Evidence
by CB Brooklyn
If 9/11 was an inside job, the perpetrators obviously have total control of the media. In this case, would it not make sense for them to plant propaganda in the media to distract those who are already suspicious of the attacks? As Dr Judy Wood has asked, “If 9/11 was well planned, wouldn't the cover-up be even more well planned?”
The perpetrators are experts at propaganda. Those who know 9/11 was an inside job also know the official story told by the media to be nothing but propaganda. Interestingly, the Washington Post says the military is targeting the “U.S. Home Audience” with a “propaganda campaign”.
Americans have a bad habit of believing those who they consider trustworthy instead of examining evidence for themselves. As former Assistant Secretary to the US Treasury, Dr Paul Craig Roberts said, “Americans never check any facts. Who do you know, for example, who has even read the Report of the 9/11 Commission, much less checked the alleged facts reported in that document. I can answer for you. You don’t know anyone who has read the report or checked the facts.”
Many still trust George W Bush simply because of the media.
People don’t check facts.
People don’t analyze evidence.
People don’t think.
How do we really know there was molten metal at Ground Zero? Just because a “mild mannered” scientist says so?
Let’s take a look at the molten metal evidence piece by piece. The reader is encouraged to look at the information for themselves and to think for themselves.
*Eyewitnesses / Statements*
Leslie Robertson - Structural Engineer / Designer of WTC:
On the Structural Engineers Association of Utah’s website, James Williams (SEAU President) described what Robertson said at an October 2001 conference: “as of 21 days after the attack, the fires were still burning and molten steel was still running”.
Robertson received millions of taxpayer dollars and could be considered a member of the Global Elite. Who do the Global Elite represent, us or themselves?
William Langewiesche - Only Journalist to Have Unrestricted Access to Ground Zero During Cleanup:
In his book “American Ground”, Langewiesche said: “in the early days, the streams of molten metal that leaked from the hot cores and flowed down broken walls inside the foundation hole.”
Did Langewiesche see this molten metal himself, or is he repeating statements from others? Do the 9/11 perpetrators control the information the media puts out?
Ron Burger - Public Health Advisor at the National Center for Environmental Health, Centers for Disease Control and Prevention:
The National Environmental Health Association’s paper “Messages in the Dust” quotes Burger: “Feeling the heat, seeing the molten steel, the layers upon layers of ash, like lava, it reminded me of Mt. St. Helens and the thousands who fled that disaster.”
Burger is on a government payroll. Is he trustworthy? Burger’s statement was published in a government document. Is it trustworthy?
Ken Holden - Involved in Organizing Ground Zero Cleanup:
The 9/11 Commission Report quotes Holden: “Underground, it was still so hot that molten metal dripped down the sides of the wall from [WTC] Building 6."
Holden is on a government payroll and helped organize the cleanup of an inside job terrorist attack. Is he trustworthy? Is the 9/11 Commission Report trustworthy, or is it propaganda?
Guy Lounsbury - Member of New York Air National Guard’s 109th Air Wing:
National Guard Magazine article written by Lounsbury (excerpt): “One fireman told us that there was still molten steel at the heart of the towers' remains. Firemen sprayed water to cool the debris down but the heat remained intense enough at the surface to melt their boots.”
If the temperature was hot enough to melt the firefighters’ boots,
their feet would have been incinerated.
When water comes in contact with molten metal,
the result is a steam explosion:
Wikipedia quote (emphasis added): “A dangerous steam explosion can be created when liquid water encounters hot, molten metal. As the water explodes into steam, it splashes the burning hot liquid metal along with it, causing an extreme risk of severe burns to anyone located nearby and creating a fire hazard.”
A Google search reveals numerous government documents with warnings and safety information on this topic.
Rest assured, the Fire Department of New York knows not to spray water anywhere near molten metal!
Steam explosions are highly dangerous,
as we learned in NYC in July 2007:
Associated Press excerpt: "McCullough was driving a tow truck that was thrown into the air by the powerful geyser of steam. He landed in the crater gouged out by the blast and suffered third-degree burns over 80 percent of his body."
Source and more information on Dr Wood’s site
Look at the Ground Zero photo below.
Note the fumes surrounding the workers. Is this really a steam explosion? Are the workers boiled?
But what about the firefighters who claim to have actually seen molten metal? Perhaps the 9/11 perpetrators performed a PSYOP suggesting it was molten metal, and this idea got repeated around Ground Zero. After such a tragedy as 9/11 people don’t wish to reflect back and relive the event, so they latch on to the first answer they get.. See Dr Wood’s site for more information.
(References for the witnesses above, as well as other quotes, can be found here and here.)
*Official Government Thermal Map Image*
The official government thermal map from 9/16/01 above shows Zone F to be the largest hot spot. But the following photo shows no large hot spots just seven days later, 9/23/01:
Assuming the official government thermal maps to be authentic, we know most of the molten metal disappeared less than two weeks after 9/11.
However, the US government thermal map images are likely doctored. As Dr Wood shows here and here, Zone F is the same area as this empty, damp hole in a FEMA picture filed 9/18/01. Where's the molten metal?
*Solid Orange Slag*
This picture appears in Steven Jones’ current (last checked August 1, 2007) September 2006 “Why Indeed” paper, which also states the photographer to be Frank Silecchia, and that the picture was taken on 9/27/01 according to the photographer’s aid. But is the picture authentic?
We notice the slag being lifted by a metal crane. Note the close proximity between the slag and the exposed hydraulics.
According to Jones’ paper (and confirmed by the charts he references), the color of the solid metal slag indicates a temperature over 845° C.
Yet, mechanical engineering handbooks reveal hydraulics to fail at a fraction of the temperature of Jones’ slag:
Machinery Lubrication – “Hydraulic Equipment Reliability: Beyond Contamination Control”
Quote (emphasis added): “Hydraulic fluid temperatures above 82°C (180ºF) damage most seal compounds and accelerate oil degradation. A single overtemperature event of sufficient magnitude can permanently damage all the seals in an entire hydraulic system, resulting in numerous leaks. The by-products of thermal degradation of the oil (soft particles) can cause reliability problems such as valve-spool stiction and filter clogging.”
Machinery Lubrication – “ Symptoms of Common Hydraulic Problems and Their Root Causes”
Quote (emphasis added): “Fluid temperatures above 180°F (82°C) can damage seals and accelerate degradation of the fluid. This means that the operation of any hydraulic system at temperatures above 180°F is detrimental and should be avoided. Fluid temperature is too high when viscosity falls below the optimum value for the system’s components. The temperature at which this occurs is dependent on the viscosity grade of the fluid in the system and can be well below 180°F.”
Machine Design – “Predicting the life of hydraulic hose”
Quote (emphasis added): “Temperature range recommended for typical rubber hose spans about –40 to 212°F [212° F = 100° C]. Fluid or ambient temperatures outside these bounds impact service life. Plasticizers leach out of elastomers faster at high temperatures, though the rate depends on the actual temperature and duration. Heat-related failure is evident when the cover shows signs of hardening and cracking, and the hose shape takes on a permanent set.
Temperatures below recommended will also shorten service life. This problem is evident when the inner tube shows signs of stiffness and cracks. Specials are available for either extreme: Low-temperature hoses for service to –67°F and high-temperature versions for applications exceeding 300°F. [300° F = 149° C]”
Jones’ slag is over 845° C, yet hydraulic fluid systems fail above 82° C.
The recommended highest temperature for standard hydraulic rubber hoses is 100° C, with special heavy duty hoses available for temperatures above 149° C.
Given the vast temperature differences between the slag and the maximum operating temperatures for hydraulics, is it plausible for Jones’ photo to be real? The temperature of the slag is over 10 times greater than the maximum allowable temperature for hydraulic fluid systems.
If there was molten metal in the ruins below,
the hydraulic systems in those orange grapplers would be destroyed.
See Dr Wood’s site for more information:
*NIST / Camera Planet Photo*
Source (Page 86 of the pdf file, page 382 of the printed NIST document)
Jones cites NIST as the source of the photo above. But he fails to mention that NIST admitted doctoring the image. In addition, Jones cropped the photo and removed NIST’s caption that read “The intensity levels have been adjusted”. The following is the photo as it appeared in Jones’ paper:
Source (currently searching for copy of Jones' paper with this image)
Jones used the colors in the photo for scientific analysis, yet NIST admitted adjusting the intensity levels. Is this good science? On top of that, why did Jones hide the fact that it was doctored?
NOTE: Following Drs Morgan Reynolds / Judy Wood’s debunk, Jones removed the photo from his paper without notice or explanation!
Jones now uses the photo below, a still from the CameraPlanet Archive video:
Although the video starts several minutes after NIST’s photo was taken, it is peculiar that the molten flow switches windows.
The following is analysis by Drs Wood/Reynolds from their paper "Why Indeed Did the WTC Buildings Disintegrate? A peer-review of Steven E. Jones' 9/11 Research":
NIST acknowledges it "adjusted" the intensity of the photos somehow, so they were already doctored. Perhaps it was real phenomena but we strongly doubt it because
• No heat source is specified
• The liquid inexplicably appears to flow from a window rather than the floor and there is no explanation for what surface would support the flow
• The flow changes windows
• The aluminum cladding on the exterior displays no signs of heat or melting despite the fact that iron begins to melt at 1538° C and aluminum alloys begin to melt at temperatures under 660° C
• The flow disappears prior to destruction of WTC 2 as the video jumps.
We cannot explain how molten metal would pour from a window ledge and then move and pour from another window ledge, although NIST claims the flow performed such a feat within seven minutes of collapse. We need answers to these questions before we become convinced that the event was real and therefore deserves analysis.
*Workers Peering Into Hole*
This image was included in Jones’ September 2006 paper with the caption “Workers evidently peering into the hot “core” under the WTC rubble.”.
The image in Jones’ PDF (linked above) has “GEOEPOCHE 85” in the lower right corner, indicating it came from page 85 of a copy of the German magazine Geo Epoche.
Jones fails to properly source the photo. Geo Epoche is not mentioned anywhere in his paper’s references, so we don’t know what edition it came from.
However, the picture has been doctored. If the orange color was real the workers’ skin would have melted off their faces. As Dr Jim Fetzer said in comparison (paraphrased): “would you put your face over a boiling tea kettle?” That’s just a mere 212° F compared to Jones’ 1500°+ F orange image.
Here is the original photo, as archived on hereisnewyork.org. As can be seen, the workers are using search lights. They are not “peering into a hot core”:
NOTE: Jones removed the photo from his paper without notice or explanation!
It should be noted that there are NO pictures whatsoever of molten metal in the ruins at Ground Zero.
Anyone having an interest in learning of Steven Jones’ research should go here.
Purpose of Fabricating Molten Metal Stories
Why would the 9/11 perpetrators fabricate a molten metal story? Perhaps it’s a cover for what really happened.
Notice the orange colored fumes in the photo below.
If that were a steam explosion, the driver of the grappler would be severely burned. But who ever heard of orange steam anyway? Take a look at the Solid Orange Slag picture and notice similar orange fumes.
As Dr Judy Wood shows in her paper, the orange fumes are the result of molecular dissociation.
Why would the 9/11 perpetrators fabricate such a story when they know people will eventually catch on? The perpetrators are planning a police state, following the next false flag terror attack. When the police state is in full force, the public will be powerless. No new 9/11 investigation. I encourage everyone to read Andrew Johnson’s article “A Touch of “The Hidden Hand”? - Is the Next False Flag Attack on US Soil Near?” and to spread the information as far and as wide as possible. People need to work together to prevent this from happening.
Hopefully, this "wtc molten metal: fact of fiction" article helped to expose what's happening.
================== from forums 911movement.org =============
a clip from Relics From the Rubble, an early History Channel presentation on the effort to secure for museums souvenirs of the tragedy.
There are two clips mentioning the lack of filing cabinets, the museum guy
and the guy at FreshKills
These clips are from
Relics From the Rubble
The program came out in 2002, long before there was any controversy about why or how three buildings poofed.
If there had been filing cabinets squashed flat, http://www.thewebfairy.com/911/h-effect/h-...orknob.divx.avi
would have dad no reason not to say so.
identifies the people interviewed in this production.
THAT"S THE ***ONLY*** filing cabinet found.
Out of TWO HUNDRED STORY BUILDINGS
THAT"S THE ***ONLY*** filing cabinet found.
Shrivelled as heck, there are remnants of ***unburned** file folders inside it.
This is a hard evidence forensic proof of some force not heating paper as metal looks like it has been exposed to "thousands of degrees".
There were no phones. No doorknobs.
This briefcase fell 103 stories but survived intact
This is all that's left of the 1993 WTC Attack memorial
It was minding it's own business in an open courtyard.
They admit to having microwave based "non lethal" pain rays.
This is dated March 2001
WE expect that's how they got people to jump out of the building.
Rumsfeld's Ray Gun